with the speed of roller stop device is too low to prevent the occurrence of blocking cars.
Port: Qingdao harbor
Minimum Order Quantity: 1 Unit/Units
Supply Ability: 1 Unit/Units per Week
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: container
Delivery Detail: within 30 days after receipt of down payment
FN271F High-speed carding System machine
Application It applies to the chemical fiber and hybrid fiber opening, carding, mixed and cluster tops a certain specification, there are regular articles on the inside ring for use under the procedures
Main specifications and technical features :
Increase the width of machine:1200mm,1500mm | roller speed:600 r / min (VVVF) |
The scope of application of raw materials:Chemical fiber and blended, length 25-127mm, size 0.8-30D | Adolf working diameter:φ650mm |
Feeding mode: Double-box volume automatic photoelectric control for feeding | Doffer speed :10-75 rev / min (VVVF) |
7-Quantitative output tops 20 grams /m | Cleaner air volume (continuous): 2200 meters3/h.Each |
Multiples of the total stretch :32-140-fold | Device be used with ring forms: manual or three-and four-bit-for-tube-station automatic |
Be the maximum speed: 200 m / min | Applicable specifications cans: φ600mm × 900mm φ400mm × 1100mm (optional) |
Maximum capacity: 240 kg / table | The entire machine power: 12KW |
Working diameter of the cylinder:φ770mm | Account for ground(L×W):(Width 1.2m)11000×2290,width 1.5m 11000×2590 |
Cylinder speed: 400 r / min (VVVF) | Machine Weight:11000kg |
work roll diameter:φ250mm |
Features:1, feed-based metal parts, hardware detection and cotton debris layer thickness from the stop to protect the machine safety.
2, with the speed of roller stop device is too low to prevent the occurrence of blocking cars.
3, with the top off device shall stop.
4, has a suction device to draw air flying machine short fiber wool to prevent traffic congestion, lower frequency.
5, enter the gross floor Autoleveller system by the automatic adjustment in order to ensure the stability of uniform tops.
6, three workers and a Four-cylinder automatic for loop can be further reduced the labor intensity of workers.
7, electrical control cabinet installed on the machine in front of the rack, touch-screen machines installed in the casing on the left side of the front, easy to operate, increasing the work space.
8, automatic control of a programmable logic controller and touch screen communication, through the touch screen to set up and modify the process parameters and the right time to observe the operation of moving parts and the emergence of state failure, employing dialogue machine programmable logic controller control the frequency converter so that a more stable, thus ensuring the normal operation of the machine.
9, the whole casing closed safety, appearance neat and beautiful.