Virgin Polypropylene fiber
1.ISO9001-2000 certificate
2.Exporting for15 years
3.High reputation,the only TVA member in Asia
Port: Tianjin/Xingang port
Minimum Order Quantity: 1 Ton/Tons as you request.
Supply Ability: 500 Ton/Tons per Month as you request.
Payment Terms: L/C,D/P,T/T
Contact Supplier
Packaging Detail: In 25KG plastic bags/small kraft paper/PVA bags for shipment.
Delivery Detail: Within 14-21days after get the 30% deposit.
1,Virgin Polypropylene fiber
2,Specification ofPolypropylene fiber for concrete
| Raw material | Polypropylene fiber |
| Break elogation | 15-20% |
| Fiber type | Monofilament |
| Fiber diameter | 0.02 +/- 0.005mm |
| Melting point | 160-170 centigrade |
| Density | 0.85-0.93g/m3 |
| Acid/alkali resistance | Strong |
| Tensile strength(mpa) | 7.54-7.78cn/dex |
3,Features of monofilament:
1) No agglomeration and easily spreads around in mortar or concrete,
Guaranteeing the property of crack resistance effectively
2) Convenient applying: No need to change the proportion of mortar, and
Just put the fibers into the mortar mixture and stir for a moment after
Adding water.
3) Fine economic property.
4) The fiber has stable chemical property, strong acid and alkali resistance, and can be used in any engineering projects.
Suitable engineering for polypropylene monofilament:
1) be suitable for the waterproof layer, floor, inner/outer wall of industrial and construction.
2) increases cracking resistance on the surface of industrial workshop,warehouse and parking.
3) increases cracking/seepage resistance of the ground in natatorium, swimming pool, pond and ditch.
4) be suitable for any mortar projects and fine aggregate concrete projects.
4,Application instructions:
1) compound amount: To resist the common cracks on surfaces,0.9-1.5kg/m3 fibers to cement paint are enough, and for reinforced application
0.9-1.8kg/m3 are enough;
12-19mm polypropylene fiber is suitable for the use of concrete;and 6-9mm for motar.
2) stirring requirement: The proportion of cement, sand and aggregate is
no need to be changed. Put cement, aggregate, additive and fiber together,
Then stir after adding enough water (do not stir without water) and time
For stirring can be prolonged for 2- 3 minutes.
For more details,welcome to contact us.
Best regards!
Model No.: 12k
Features: 1.We can discuss the price when you see the sample
2. 12k carbon fiber
3.We can supply sample for free
Model No.:
Features: 3D Acrylic Tops RWH BRIGHT
Super soft hand feeling
High shrinkage rate (20-28)
Top quality imported raw material-Acrylic tow
Model No.: HCS
Features: hollow recycled polyester staple fiber , used as the stuffing for toys , sofa , pillow ,cushion and non woven
Model No.:
Features: hollow recycled staple fiber , used as the stuffing for toys , sofa , pillow ,cushion , non woven and so on .
Model No.: HCS
Features: hollow recycled staple fiber , usedas the stuffing for toys , sofa , pillow ,cushion ...
Model No.: 7D-15D X 32MM-64MM
Features: polyester staple fiber is made from 100% bottle flakes with siliconized or non-siliconized.
Model No.: all kinds
Features: 1)the base materical of produce carbon fibre
2)Factory direct
3)Affordable
Model No.: 15Dx64mm
Features: We mainly manufacture and sell Hollow Conjugated Non Silicon Fiber with satisfied service and short delivery
Model No.: 3Dx108mm
Features: We mainly manufacture and sell Black Polyester tops with satisfied service and short delivery
Model No.: 1.5D,3D
Features: We mainly manufacture and sell Short Black Polyester Fibre Solid Dry Dope Dyed with satisfied service and short delivery.
Model No.: 1.5Dx38mm,3Dx64mm,6Dx64mm
Features: We mainly manufacture and sell Polyester Staple Fibre waste with satisfied service and short delivery.
Model No.: 3D
Features: We mainly manufacture and sell Black Polyester Staple Fibre Recycled with satisfied service and short delivery.