type: Rein forced plastic tarpaulin

Size: the finished size of each sheet is 4 x 5 meters +/-1% or 4 x 50 meters

Area of use : Mainly for temporary human shelter or other personal peotection purposes

Material: Woven high density polyethylene(HDPE)black fibres,Fabric laminated on both sides with low density polyethylene(LDPE) coating,with reinforced rims by heat sealing on all sides, (or 2 sides heat sealing and 2 sides double stitching), and a PE or PP rope on the edge,inside the hem, 1000 denier minimum

tensile strength : minimum 600N both directions of warp and weft(BS 2576,50 mm grab test, or equivalent)

Tear strength: minimum 100 N both directions(BS 4303 WING TEAR OR EQUIVALENT) or under ISO 4674 ( A2)

UV Resistance: stabilized against ultraviolet rays and excess heat for long outdorr exposure, Maximum 5% loss on original tensile strength under ISO 1421 after 1500 hours UV under ASTM G53/94(UVB 313 nm peak)

Welding: Only one is allowed along the middle of the sheet, length wise, Minimum resistance is 80% of the original tarpaulin tensile strength in the weft under ISO 1421 plus additional procedure

Reinforcement eyelets: Provided with aluminum or metal eyelets or equivalent on four sheet sides of the single sheets at 100cm +/-5cm centre to centre, providing very strong fixation points

Flammability: Flash point above 200C

Printing logo: A line of size UNHCR logos printed on both sides of the sheets, across the five-meter side, placed one meter from the bottom edge of the five-meter side..

Logo stype: UNCHR, UNICEF,ETC... AS YOUR RUQUESTED.

Colour: white on BOTH SIDES.