GA014SF Soft Winding Machine - GA014SF

GA014SF Soft winding machine is before Dyeing preparing using, is suit to most of Spinning factory. - more info check here: https://www.textile-product.com/GA014SF-Soft-Winding-Machine-11176355/

Quick Brief

Place of Origin: Jiangsu China (Mainland) Brand Name: TANGSHI Model Number: GA014SF Type: Winder Machine Condition: New Spindle No.:: Max: 120 Spindles Machine Type:: Two Sides Speed:: 350-400 M/Min Take Up Bobbin:: Tube bobbin, Conical Cone Auto Stop device:: Installed Length Counter:: optional Inverter Control:: Optional Air Splicer:: Optional

Specifications and Product Details:

Application:

GA014SF Soft winding can winding pure cotton yarn, chemical-fiber and blended yarns on cones, it’s for preparing winding before dyeing.

Main technical data:

*Type: Double sides(Groove Drum)

*Number of spindles: 40, 60, 80, 100 ,120 (100 as the standard spindle number)

*Spindle Gauge: 254mm

*Guide Traverse: 152mm

*Winding speed: 350-400 meters/minute

*Grooved drum: Bakelite grooved drum of φ80mm with 2 circles of the same distance.

*Drum guide travel: 147mm

*Grooved Drum transverse: 2.2mm , 3.2mm, two types.

*Traversing times of grooved drum: 14.2 times/minute.

*Bobbin: 0°, 3° 30′ , 4° 20′or can be make-to-order against offered sample bobbin.

*Take up size: Φ180 (big Dia) ×149mm (length)

*Density of cheese yarn on cones: 0.30-0.40g/cm³

*Yarn-break auto-stop device: Each spindle has an independent set of auto-stop device.

*Tension device: Tension balancing device is set with total 10 kinds of tension spacers (weight balancing can be carried out according to technical requirements).

*Yarn cleaning device: installed Blade for Yarn cleaning.

*Diameter of Drum’s belt pulley: Φ110mm

*Blank-bobbin conveyer device: It is equipped at the left and right side of the machine, and it’s used to convey blank bobbins from the head to the rear.

*Hold yarn shelf: can use Cylinder bobbin, Conical Cone and etc.

*Anti-Ribboning device: it has a intermittent switch in the Electronic box to make the motor rotating turning on and off circularly.

*Traversing gear: it installed grooved-drum traversing gear to remove the hard edges of the cone.

*Waste yarn Cleaning device: it can optional to install GUO13A type to-and-fro blowing cleanser on the machine.

*Machine size: L13795 x W1122 x H1615mm (it’s 100 spindles size ).

*Motor Specification: Main Motor, JF0-32A-4, 1.8Kw, 380V, and 1440 RPM, 2 sets.

Auxiliary Motor, FW11A-6, 0.37Kw, 380V, and 960 RPM, 1 set.

*Triangle belt: A1800, 6 pieces

The machine can optional install Electric Cleaner, Length counting device per spindle, time counting device, Frequency Inverter Controller, Air Splicer and etc.