Nonwoven Composite Geo-textile
Mainly used in railway, highway,
ports, sea walls and other projects,
water infiltration
Port: shanghai
Minimum Order Quantity: 1000 Square Meter/Square Meters ///////////
Supply Ability: 10000 Square Meter/Square Meters per Month ///////////////////
Payment Terms: L/C,T/T
Contact SupplierPackaging Detail: plastic foil
Delivery Detail: 20days
Nonwoven Composite Geo-textile
Mainly used in railway, highway,
ports, sea walls and other projects,
water infiltration
Woven geotextile non-woven composite fabrics, mainly uses polyester, polypropylene filament woven high-strength geotextile, woven geotextile and polyester staple fiber needle geotextile composite formed. All kinds of engineering design requirements in accordance with the production engineering required to achieve a variety of specifications of composite geotextiles.
Its main uses are: railways, highways, ports, docks, seawalls and other engineering materials, as a basis for reinforcement. At the same time play a penetration of water. Anti-consider effect, prevent soil erosion. As an alternative geogrid. As a subgrade enhancement. Filtration materials and easy construction. Its technical targets (see Table IV).
Item | Date | ||||||||||
30 | 40 | 50 | 60 | 70 | 80 | 100 | 120 | 140 | |||
Assessment Items | Longitudinal breakage strength/(KN/M)≥ | ||||||||||
Lateral breakage strength/(KN/M)≥ | Lateral breakage strength standard value×0.8 | ||||||||||
Fixed load stretch ratio/% ≤ | Filament | 30 | 35 | ||||||||
Cleft membrane Wire | 25 | 30 | |||||||||
CBR strength/KN ≥ | 3.1 | 4.2 | 5.2 | 6.3 | 7.3 | 8.4 | 10.5 | 12.6 | 14.7 | ||
Equivalent hole size O90(O95) mm | 0.065-0.200 | ||||||||||
Vertical osmotic coefficient/ cm/s) | K*(10-1-10-3) within which: k=1.0-9.9 | ||||||||||
Reference items | Breadth area weight error/ % | -1.0 | |||||||||
Unit area weight error/ % | -8 |
Note: (1) The constant load elongation assess both vertical and horizontal directions. Load values were set a strong standard value for vertical and horizontal strength standard value.
(2) mass per unit area width deviation and bias, the value of assessment in accordance with standard composite of products.
(3) Actual size specifications ranging between adjacent table, when calculated by interpolation the corresponding indicators, beyond the scope of the table, the index from the supply and demand
Agreement between the parties.