new design-carding machine - A186H

new design-carding machine

A186H

Micromputer will control and digital display relevant parameters.

The preceding process of the machine is combined openig and scotching machine and the following process is drawing frame.

The machine is mainly used for the processing of the cotton laps and cotton layers . The machine combs the curly cotton lump moving from the preceding process or feeding hopper to straight single fibres. Meanwhile the impurities will be removed . Then it spins them into standard slivers and stored in a sliver can for nest process.

Main advantages:

Microcomputer will control and digital display relevant parameters. Front and rear stationary flats and card segment under taker-in are fixed . Automatic stopping while doffer returning flow of fibers, thick laps and sliver breakage . Testing the delivery speed and draft range display the length.

Flat uses 0.56mm small heel toe to improve the combing efficiency. Doffer motor is of steeples frequency control by inverter. Piecing up with low speed and high-speed motion. Continuous suction is adopted.

Main specifications and technical characteristics.

Model: right –handed(standing in front of the machien , facing to the doffer)

Width: 1020mm

Applicable lap: max diameter dia.550mm

Width: 980mm

Cylinder working diameter: dia.1289mm

Doffer working diameter: 707mm

Cylinder speed(selective):330 rpm(for chemical fiber); 360 rpm (for cotton)

Doffer speed: frequency control

Draft multiple: 67.3-120.2

Auxiliary carding parts: taker-in card segment , front-rear stationary flats.

Net weight:4500kg

Motor: main motor 3.3kw doffer motor 1.1kw F type

Total size: 3684*2009.5mm(lxw)

Output: 15kg-30kg/h